A comparative study of guided wave propagation in timber poles with isotropic and transversely isotropic material models

Mahbube Subhani, Jianchun Li, Bijan Samali

    Research output: Contribution to journalArticlepeer-review

    15 Citations (Scopus)

    Abstract

    Guided wave (GW) has been used for many years in non-destructive testing (NDT). There are various ways to generate the guided wave, including impact or impulse either manually or using devices. Although the method of impact or impulse is considered to be simple and practical in guided wave generation, it produces waves with broadband frequencies, which often make analysis much more difficult. The frequency bandwidth produced by manual impacts is usually at the low end, and is therefore justified when dealing with one dimensional wave propagation assumption in low strain integrity testing of cylindrical structures. Under such assumption if the velocity is known accurately, NDTs can produce reasonably good results for the condition assessment of the structure. However, for guided wave propagation in timber pole-like structures, it is rather complicated as timber is an orthotropic material and wave propagation in an orthotropic medium exhibits different characteristics from that in isotropic medium. It is possible to obtain solutions for guided wave propagation in orthotropic media for cylindrical structures, even though the orthotropic material greatly complicates GW propagation. In this paper, timber has been considered as a transversely isotropic (i.e. simplified orthotropic) material and a comparative study of GW propagation in a timber pole is conducted considering isotropic and transversely isotropic modelling. Phase velocity, group velocity and attenuation are the main parameters for this comparative study. Moreover, traction-free situation and embedded geotechnical condition are also taken into consideration to evaluate the effect of boundary. Displacement profile, wave propagation pattern and power flow at particular frequency are utilized to determine different displacement components of longitudinal and flexural waves along and across the timber pole. Effect of temperature and moisture content (in terms of modulus of elasticity) in timber pole is also compared to show the variation in phase velocity.
    Original languageEnglish
    Pages (from-to)65-79
    Number of pages15
    JournalJournal of Civil Structural Health Monitoring
    Volume3
    Issue number2
    DOIs
    Publication statusPublished - 2013

    Fingerprint

    Dive into the research topics of 'A comparative study of guided wave propagation in timber poles with isotropic and transversely isotropic material models'. Together they form a unique fingerprint.

    Cite this