TY - JOUR
T1 - Concept design for a 1-lead wearable/implantable ECG front-end : power management
AU - George, Libin
AU - Gargiulo, Gaetano Dario
AU - Lehmann, Torsten
AU - Hamilton, Tara Julia
PY - 2015
Y1 - 2015
N2 - Power supply quality and stability are critical for wearable and implantable biomedical applications. For this reason we have designed a reconfigurable switched-capacitor DC-DC converter that, aside from having an extremely small footprint (with an active on-chip area of only 0.04 mm2), uses a novel output voltage control method based upon a combination of adaptive gain and discrete frequency scaling control schemes. This novel DC-DC converter achieves a measured output voltage range of 1.0 to 2.2V with power delivery up to 7.5mW with 75% efficiency. In this paper, we present the use of this converter as a power supply for a concept design of a wearable (15mm × 15 mm) 1-lead ECG front-end sensor device that simultaneously harvests power and communicates with external receivers when exposed to a suitable RF field. Due to voltage range limitations of the fabrication process of the current prototype chip, we focus our analysis solely on the power supply of the ECG front-end whose design is also detailed in this paper. Measurement results show not just that the power supplied is regulated, clean and does not infringe upon the ECG bandwidth, but that there is negligible difference between signals acquired using standard linear power-supplies and when the power is regulated by our power management chip.
AB - Power supply quality and stability are critical for wearable and implantable biomedical applications. For this reason we have designed a reconfigurable switched-capacitor DC-DC converter that, aside from having an extremely small footprint (with an active on-chip area of only 0.04 mm2), uses a novel output voltage control method based upon a combination of adaptive gain and discrete frequency scaling control schemes. This novel DC-DC converter achieves a measured output voltage range of 1.0 to 2.2V with power delivery up to 7.5mW with 75% efficiency. In this paper, we present the use of this converter as a power supply for a concept design of a wearable (15mm × 15 mm) 1-lead ECG front-end sensor device that simultaneously harvests power and communicates with external receivers when exposed to a suitable RF field. Due to voltage range limitations of the fabrication process of the current prototype chip, we focus our analysis solely on the power supply of the ECG front-end whose design is also detailed in this paper. Measurement results show not just that the power supplied is regulated, clean and does not infringe upon the ECG bandwidth, but that there is negligible difference between signals acquired using standard linear power-supplies and when the power is regulated by our power management chip.
KW - DC-DC converters
KW - electrocardiography
UR - http://handle.uws.edu.au:8081/1959.7/uws:32872
U2 - 10.3390/s151129297
DO - 10.3390/s151129297
M3 - Article
SN - 1424-8220
VL - 15
SP - 29297
EP - 29315
JO - Sensors
JF - Sensors
IS - 11
ER -