Skip to main navigation Skip to search Skip to main content

Dynamic tensile behaviour of re-entrant honeycombs

  • Swinburne University of Technology

Research output: Contribution to journal › Article › peer-review

84 Citations (Scopus)

Abstract

This work reports on the dynamic tensile behaviour of an auxetic structure, namely, honeycomb with representative re-entrant topology. Quasi-static and dynamic tensile tests were conducted by employing MTS and Instron VHS 8800 hydraulic testing machines, respectively. The re-entrant samples were printed using AlSi12 powder via the selective laser melting (SLM) process. The deformation and force - displacement curves were of interest A good agreement was observed between the numerical simulations and the experimental results. Subsequently, numerous finite element (FE) simulations were performed through ABAQUS/Explicit. Three deformation modes were classified, especially with a tensile shock wave observed within the Localised deformation mode. An analytical equation was obtained for the dynamic force of such materials under tension, which agrees well with the FE result. The effect of loading velocity and cell geometries was considered.
Original languageEnglish
Article number103497
Number of pages13
JournalInternational Journal of Impact Engineering
Volume139
DOIs
Publication statusPublished - Jan 2020
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

Fingerprint

Dive into the research topics of 'Dynamic tensile behaviour of re-entrant honeycombs'. Together they form a unique fingerprint.

Cite this