Endurance enhancement of aerial vehicle energy transmitters using conical corrugated horn antenna

Archiman Lahiry; Khoa N. Le; Vo Nguyen Quoc Bao; Vivian W. Y. Tam

doi:10.1109/APCC60132.2023.10460743

Endurance enhancement of aerial vehicle energy transmitters using conical corrugated horn antenna

Archiman Lahiry, Khoa N. Le, Vo Nguyen Quoc Bao, Vivian W. Y. Tam

Research output: Chapter in Book / Conference Paper › Conference Paper › peer-review

1 Citation (Scopus)

Abstract

A corrugated horn antenna is proposed for the unmanned aerial vehicle energy transmitter (UAV-ET) application. Firstly, the proposed antenna can be manufactured using polylactic acid (PLA) 3-dimensional (3-D) printing with copper conductive paint coating, which is lightweight and cost-effective compared to metal 3-D printing. Secondly, the results confirm that the sidelobe level of the antenna is below -30 dB, and radiation efficiency is above 99 % throughout the operating frequency band. Also, the proposed antenna increases the UAV-ET wireless power transfer (WPT) time by 47.5 % and 4.5 % compared to UAV-ETs equipped with a dipole array and a slotted waveguide array respectively. Furthermore, the mass production of the antenna is easy because of its design simplicity which is highly desirable for the large swarm of UAV-ETs to increase the wireless power transfer coverage for charging ground sensors.

Original language	English
Title of host publication	Proceedings of the 28th Asia Pacific Conference on Communications (APCC 2023), 19-22 November 2023, Sydney, New South Wales, Australia
Publisher	IEEE
Pages	273-278
Number of pages	6
ISBN (Print)	9798350382617
DOIs	https://doi.org/10.1109/APCC60132.2023.10460743
Publication status	Published - 2023
Event	Asia-Pacific Conference on Communications - Duration: 19 Nov 2023 → …

Publication series

Name
ISSN (Print)	2163-0771

Conference

Conference	Asia-Pacific Conference on Communications
Period	19/11/23 → …

Bibliographical note

Publisher Copyright:
© 2023 IEEE.

Access to Document

10.1109/APCC60132.2023.10460743

Cite this

@inproceedings{0c5e70192164415fb410564d34a9622e,

title = "Endurance enhancement of aerial vehicle energy transmitters using conical corrugated horn antenna",

abstract = "A corrugated horn antenna is proposed for the unmanned aerial vehicle energy transmitter (UAV-ET) application. Firstly, the proposed antenna can be manufactured using polylactic acid (PLA) 3-dimensional (3-D) printing with copper conductive paint coating, which is lightweight and cost-effective compared to metal 3-D printing. Secondly, the results confirm that the sidelobe level of the antenna is below -30 dB, and radiation efficiency is above 99 % throughout the operating frequency band. Also, the proposed antenna increases the UAV-ET wireless power transfer (WPT) time by 47.5 % and 4.5 % compared to UAV-ETs equipped with a dipole array and a slotted waveguide array respectively. Furthermore, the mass production of the antenna is easy because of its design simplicity which is highly desirable for the large swarm of UAV-ETs to increase the wireless power transfer coverage for charging ground sensors.",

author = "Archiman Lahiry and Le, {Khoa N.} and Bao, {Vo Nguyen Quoc} and Tam, {Vivian W. Y.}",

note = "Publisher Copyright: {\textcopyright} 2023 IEEE.; Asia-Pacific Conference on Communications ; Conference date: 19-11-2023",

year = "2023",

doi = "10.1109/APCC60132.2023.10460743",

language = "English",

isbn = "9798350382617",

publisher = "IEEE",

pages = "273--278",

booktitle = "Proceedings of the 28th Asia Pacific Conference on Communications (APCC 2023), 19-22 November 2023, Sydney, New South Wales, Australia",

}

Lahiry, A, Le, KN, Bao, VNQ & Tam, VWY 2023, Endurance enhancement of aerial vehicle energy transmitters using conical corrugated horn antenna. in Proceedings of the 28th Asia Pacific Conference on Communications (APCC 2023), 19-22 November 2023, Sydney, New South Wales, Australia. IEEE, pp. 273-278, Asia-Pacific Conference on Communications, 19/11/23. https://doi.org/10.1109/APCC60132.2023.10460743

Endurance enhancement of aerial vehicle energy transmitters using conical corrugated horn antenna. / Lahiry, Archiman; Le, Khoa N.; Bao, Vo Nguyen Quoc et al.
Proceedings of the 28th Asia Pacific Conference on Communications (APCC 2023), 19-22 November 2023, Sydney, New South Wales, Australia. IEEE, 2023. p. 273-278.

Research output: Chapter in Book / Conference Paper › Conference Paper › peer-review

TY - GEN

T1 - Endurance enhancement of aerial vehicle energy transmitters using conical corrugated horn antenna

AU - Lahiry, Archiman

AU - Le, Khoa N.

AU - Bao, Vo Nguyen Quoc

AU - Tam, Vivian W. Y.

PY - 2023

Y1 - 2023

N2 - A corrugated horn antenna is proposed for the unmanned aerial vehicle energy transmitter (UAV-ET) application. Firstly, the proposed antenna can be manufactured using polylactic acid (PLA) 3-dimensional (3-D) printing with copper conductive paint coating, which is lightweight and cost-effective compared to metal 3-D printing. Secondly, the results confirm that the sidelobe level of the antenna is below -30 dB, and radiation efficiency is above 99 % throughout the operating frequency band. Also, the proposed antenna increases the UAV-ET wireless power transfer (WPT) time by 47.5 % and 4.5 % compared to UAV-ETs equipped with a dipole array and a slotted waveguide array respectively. Furthermore, the mass production of the antenna is easy because of its design simplicity which is highly desirable for the large swarm of UAV-ETs to increase the wireless power transfer coverage for charging ground sensors.

AB - A corrugated horn antenna is proposed for the unmanned aerial vehicle energy transmitter (UAV-ET) application. Firstly, the proposed antenna can be manufactured using polylactic acid (PLA) 3-dimensional (3-D) printing with copper conductive paint coating, which is lightweight and cost-effective compared to metal 3-D printing. Secondly, the results confirm that the sidelobe level of the antenna is below -30 dB, and radiation efficiency is above 99 % throughout the operating frequency band. Also, the proposed antenna increases the UAV-ET wireless power transfer (WPT) time by 47.5 % and 4.5 % compared to UAV-ETs equipped with a dipole array and a slotted waveguide array respectively. Furthermore, the mass production of the antenna is easy because of its design simplicity which is highly desirable for the large swarm of UAV-ETs to increase the wireless power transfer coverage for charging ground sensors.

UR - https://hdl.handle.net/1959.7/uws:75726

U2 - 10.1109/APCC60132.2023.10460743

DO - 10.1109/APCC60132.2023.10460743

M3 - Conference Paper

SN - 9798350382617

SP - 273

EP - 278

BT - Proceedings of the 28th Asia Pacific Conference on Communications (APCC 2023), 19-22 November 2023, Sydney, New South Wales, Australia

PB - IEEE

T2 - Asia-Pacific Conference on Communications

Y2 - 19 November 2023

ER -

Endurance enhancement of aerial vehicle energy transmitters using conical corrugated horn antenna

Abstract

Publication series

Conference

Bibliographical note

Access to Document

Other files and links

Fingerprint

Cite this