HV substation earth grid commissioning using current injection test (CIT) method

M. Nassereddine; J. Rizk; A. Hellany; M. Nagrial

doi:10.1109/ICIEA.2013.6566342

HV substation earth grid commissioning using current injection test (CIT) method

M. Nassereddine, J. Rizk, A. Hellany, M. Nagrial

Research output: Chapter in Book / Conference Paper › Conference Paper › peer-review

5 Citations (Scopus)

Abstract

The existing of the High Voltage (HV) infrastructure creates a special set of safety circumstances. Earthing system is one of the main elements to mitigate any unsafe conditions. Commissioning the earth grid certifies that the implemented system fulfills to the pertinent necessities. This paper endeavors to present vital information on how to perform the earth grid commissioning of an HV infrastructure. This paper will minutiae the minimum necessities to guarantee the test will symbolize the actual fault case that the design was based on. A flow chart diagram is established and presented in this paper to allow the determination of the most suitable injection route. The results of the multiple case studies are discussed and the results are shown in this paper.

Original language	English
Title of host publication	Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications (ICIEA): 19-21 June 2013, Melbourne, Australia
Publisher	IEEE
Pages	67-72
Number of pages	6
ISBN (Print)	9781467363204
DOIs	https://doi.org/10.1109/ICIEA.2013.6566342
Publication status	Published - 2013
Event	IEEE Conference on Industrial Electronics and Applications - Duration: 19 Jun 2013 → …

Conference

Conference	IEEE Conference on Industrial Electronics and Applications
Period	19/06/13 → …

Access to Document

10.1109/ICIEA.2013.6566342

Cite this

@inproceedings{a47407e300f147dca6084f95e5f3b344,

title = "HV substation earth grid commissioning using current injection test (CIT) method",

abstract = "The existing of the High Voltage (HV) infrastructure creates a special set of safety circumstances. Earthing system is one of the main elements to mitigate any unsafe conditions. Commissioning the earth grid certifies that the implemented system fulfills to the pertinent necessities. This paper endeavors to present vital information on how to perform the earth grid commissioning of an HV infrastructure. This paper will minutiae the minimum necessities to guarantee the test will symbolize the actual fault case that the design was based on. A flow chart diagram is established and presented in this paper to allow the determination of the most suitable injection route. The results of the multiple case studies are discussed and the results are shown in this paper.",

author = "M. Nassereddine and J. Rizk and A. Hellany and M. Nagrial",

year = "2013",

doi = "10.1109/ICIEA.2013.6566342",

language = "English",

isbn = "9781467363204",

pages = "67--72",

booktitle = "Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications (ICIEA): 19-21 June 2013, Melbourne, Australia",

publisher = "IEEE",

note = "IEEE Conference on Industrial Electronics and Applications ; Conference date: 19-06-2013",

}

Nassereddine, M, Rizk, J , Hellany, A & Nagrial, M 2013, HV substation earth grid commissioning using current injection test (CIT) method. in Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications (ICIEA): 19-21 June 2013, Melbourne, Australia. IEEE, pp. 67-72, IEEE Conference on Industrial Electronics and Applications, 19/06/13. https://doi.org/10.1109/ICIEA.2013.6566342

HV substation earth grid commissioning using current injection test (CIT) method. / Nassereddine, M.; Rizk, J.; Hellany, A. et al.
Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications (ICIEA): 19-21 June 2013, Melbourne, Australia. IEEE, 2013. p. 67-72.

Research output: Chapter in Book / Conference Paper › Conference Paper › peer-review

TY - GEN

T1 - HV substation earth grid commissioning using current injection test (CIT) method

AU - Nassereddine, M.

AU - Rizk, J.

AU - Hellany, A.

AU - Nagrial, M.

PY - 2013

Y1 - 2013

N2 - The existing of the High Voltage (HV) infrastructure creates a special set of safety circumstances. Earthing system is one of the main elements to mitigate any unsafe conditions. Commissioning the earth grid certifies that the implemented system fulfills to the pertinent necessities. This paper endeavors to present vital information on how to perform the earth grid commissioning of an HV infrastructure. This paper will minutiae the minimum necessities to guarantee the test will symbolize the actual fault case that the design was based on. A flow chart diagram is established and presented in this paper to allow the determination of the most suitable injection route. The results of the multiple case studies are discussed and the results are shown in this paper.

AB - The existing of the High Voltage (HV) infrastructure creates a special set of safety circumstances. Earthing system is one of the main elements to mitigate any unsafe conditions. Commissioning the earth grid certifies that the implemented system fulfills to the pertinent necessities. This paper endeavors to present vital information on how to perform the earth grid commissioning of an HV infrastructure. This paper will minutiae the minimum necessities to guarantee the test will symbolize the actual fault case that the design was based on. A flow chart diagram is established and presented in this paper to allow the determination of the most suitable injection route. The results of the multiple case studies are discussed and the results are shown in this paper.

UR - http://handle.uws.edu.au:8081/1959.7/534761

UR - http://ieeeiciea.org/2013/index.html

U2 - 10.1109/ICIEA.2013.6566342

DO - 10.1109/ICIEA.2013.6566342

M3 - Conference Paper

SN - 9781467363204

SP - 67

EP - 72

BT - Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications (ICIEA): 19-21 June 2013, Melbourne, Australia

PB - IEEE

T2 - IEEE Conference on Industrial Electronics and Applications

Y2 - 19 June 2013

ER -

HV substation earth grid commissioning using current injection test (CIT) method

Abstract

Conference

Access to Document

Other files and links

Fingerprint

Cite this