Stand Alone PV House Design for Maximum Power Output in Sydney Australia Metropolitan Area

M. Nassereddine; J. Rizk; A. Hellany; M. Nagrial; A. Elrafhi; Z. Obeid; K. Hajar

doi:10.1051/matecconf/201817101001

Stand Alone PV House Design for Maximum Power Output in Sydney Australia Metropolitan Area

M. Nassereddine
, J. Rizk
, A. Hellany
, M. Nagrial
, A. Elrafhi
, Z. Obeid
, K. Hajar

School of Engineering, Design & Built Environment

Western Sydney University
University of Technology and Applied Science

Research output: Chapter in Book / Conference Paper › Conference Paper › peer-review

2 Citations (Scopus)

Abstract

Nowadays, a strong link exists between human comfort and electrical power. Abundant doings are not possible without the support of the electrical energy. Driven by the human obligation to save the environment, the installation of PV solar system increased dramatically in the past numerous years. The installation can be grid connected or standalone system. These micro-grid situations are installed world-wide and currently are contributing to the local electrical network. To maximize the use of the generated solar system, numerous system installed energy storage in the form of batteries. These energy storages harvest the sun power during daylight to support the household electrical demand after sunset. This paper linked the house roof design to the PV solar system for maximum generation condition. Furthermore the paper contains important information on the optimum location for the solar panel to ensure continuous and reliable system is achieved. An actual real case study is presented.

Original language	English
Title of host publication	1st International Conference on Energy, Power, Petroleum and Petrochemical Engineering, E3PE 2017
Volume	171
DOIs	https://doi.org/10.1051/matecconf/201817101001
Publication status	Published - 4 Jun 2018
Event	1st International Conference on Energy, Power, Petroleum and Petrochemical Engineering, E3PE 2017 - Beirut, Lebanon Duration: 26 Apr 2017 → 28 Apr 2017

Publication series

Name	MATEC Web of Conferences
Publisher	EDP Sciences

Conference

Conference	1st International Conference on Energy, Power, Petroleum and Petrochemical Engineering, E3PE 2017
Country/Territory	Lebanon
City	Beirut
Period	26/04/17 → 28/04/17

Bibliographical note

Publisher Copyright:
© The Authors, published by EDP Sciences, 2018.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Electrical Power
Energy Storage
House Consumption
PV System

Access to Document

10.1051/matecconf/201817101001

Cite this

Nassereddine, M., Rizk, J., Hellany, A., Nagrial, M., Elrafhi, A., Obeid, Z., & Hajar, K. (2018). Stand Alone PV House Design for Maximum Power Output in Sydney Australia Metropolitan Area. In 1st International Conference on Energy, Power, Petroleum and Petrochemical Engineering, E3PE 2017 (Vol. 171). (MATEC Web of Conferences). https://doi.org/10.1051/matecconf/201817101001

@inproceedings{49275f1932c64e1ea0fb2e066c93a4e8,

title = "Stand Alone PV House Design for Maximum Power Output in Sydney Australia Metropolitan Area",

abstract = "Nowadays, a strong link exists between human comfort and electrical power. Abundant doings are not possible without the support of the electrical energy. Driven by the human obligation to save the environment, the installation of PV solar system increased dramatically in the past numerous years. The installation can be grid connected or standalone system. These micro-grid situations are installed world-wide and currently are contributing to the local electrical network. To maximize the use of the generated solar system, numerous system installed energy storage in the form of batteries. These energy storages harvest the sun power during daylight to support the household electrical demand after sunset. This paper linked the house roof design to the PV solar system for maximum generation condition. Furthermore the paper contains important information on the optimum location for the solar panel to ensure continuous and reliable system is achieved. An actual real case study is presented.",

keywords = "Electrical Power, Energy Storage, House Consumption, PV System",

author = "M. Nassereddine and J. Rizk and A. Hellany and M. Nagrial and A. Elrafhi and Z. Obeid and K. Hajar",

note = "Publisher Copyright: {\textcopyright} The Authors, published by EDP Sciences, 2018.; 1st International Conference on Energy, Power, Petroleum and Petrochemical Engineering, E3PE 2017 ; Conference date: 26-04-2017 Through 28-04-2017",

year = "2018",

month = jun,

day = "4",

doi = "10.1051/matecconf/201817101001",

language = "English",

volume = "171",

series = "MATEC Web of Conferences",

publisher = "EDP Sciences",

booktitle = "1st International Conference on Energy, Power, Petroleum and Petrochemical Engineering, E3PE 2017",

}

Nassereddine, M, Rizk, J , Hellany, A, Nagrial, M, Elrafhi, A, Obeid, Z & Hajar, K 2018, Stand Alone PV House Design for Maximum Power Output in Sydney Australia Metropolitan Area. in 1st International Conference on Energy, Power, Petroleum and Petrochemical Engineering, E3PE 2017. vol. 171, MATEC Web of Conferences, 1st International Conference on Energy, Power, Petroleum and Petrochemical Engineering, E3PE 2017, Beirut, Lebanon, 26/04/17. https://doi.org/10.1051/matecconf/201817101001

Stand Alone PV House Design for Maximum Power Output in Sydney Australia Metropolitan Area. / Nassereddine, M.; Rizk, J.; Hellany, A. et al.
1st International Conference on Energy, Power, Petroleum and Petrochemical Engineering, E3PE 2017. Vol. 171 2018. (MATEC Web of Conferences).

Research output: Chapter in Book / Conference Paper › Conference Paper › peer-review

TY - GEN

T1 - Stand Alone PV House Design for Maximum Power Output in Sydney Australia Metropolitan Area

AU - Nassereddine, M.

AU - Rizk, J.

AU - Hellany, A.

AU - Nagrial, M.

AU - Elrafhi, A.

AU - Obeid, Z.

AU - Hajar, K.

PY - 2018/6/4

Y1 - 2018/6/4

N2 - Nowadays, a strong link exists between human comfort and electrical power. Abundant doings are not possible without the support of the electrical energy. Driven by the human obligation to save the environment, the installation of PV solar system increased dramatically in the past numerous years. The installation can be grid connected or standalone system. These micro-grid situations are installed world-wide and currently are contributing to the local electrical network. To maximize the use of the generated solar system, numerous system installed energy storage in the form of batteries. These energy storages harvest the sun power during daylight to support the household electrical demand after sunset. This paper linked the house roof design to the PV solar system for maximum generation condition. Furthermore the paper contains important information on the optimum location for the solar panel to ensure continuous and reliable system is achieved. An actual real case study is presented.

AB - Nowadays, a strong link exists between human comfort and electrical power. Abundant doings are not possible without the support of the electrical energy. Driven by the human obligation to save the environment, the installation of PV solar system increased dramatically in the past numerous years. The installation can be grid connected or standalone system. These micro-grid situations are installed world-wide and currently are contributing to the local electrical network. To maximize the use of the generated solar system, numerous system installed energy storage in the form of batteries. These energy storages harvest the sun power during daylight to support the household electrical demand after sunset. This paper linked the house roof design to the PV solar system for maximum generation condition. Furthermore the paper contains important information on the optimum location for the solar panel to ensure continuous and reliable system is achieved. An actual real case study is presented.

KW - Electrical Power

KW - Energy Storage

KW - House Consumption

KW - PV System

UR - https://www.scopus.com/pages/publications/85049385188

U2 - 10.1051/matecconf/201817101001

DO - 10.1051/matecconf/201817101001

M3 - Conference Paper

AN - SCOPUS:85049385188

VL - 171

T3 - MATEC Web of Conferences

BT - 1st International Conference on Energy, Power, Petroleum and Petrochemical Engineering, E3PE 2017

T2 - 1st International Conference on Energy, Power, Petroleum and Petrochemical Engineering, E3PE 2017

Y2 - 26 April 2017 through 28 April 2017

ER -

Stand Alone PV House Design for Maximum Power Output in Sydney Australia Metropolitan Area

Abstract

Publication series

Conference

Bibliographical note

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this