Abstract
The organic solar cell has attracted much interest due to its high power conversion efficiency and low cost. This paper studies the interlaminar stresses between the working layer and the substrate of the organic solar cell. The effects of solar irradiation and wind speed have been considered as well. The multilayered film model and the thin film–substrate model are employed separately in reaction to the different magnitude of the film and substrate thickness. Both models straightforwardly show the dangerous stress areas at the two ends of the working layer. Numerical examples reveal that the interlaminar stress increases as the solar irradiation increases while decreases with the wind speed increasing. A thicker working layer of the organic solar cell results in larger interlaminar stresses. The critical value of sunlight irradiation for varying external environment is predicted. The critical value of sunlight irradiation at the wind speed of Vf = 15 m/s increases by nearly 20%, compared with that of the wind speed Vf = 5 m/s. In addition, the effect of the equivalent thermal expansion coefficient of the working layer on the interlaminar stress is also explored.
Original language | English |
---|---|
Pages (from-to) | 3203-3221 |
Number of pages | 19 |
Journal | Archive of Applied Mechanics |
Volume | 91 |
Issue number | 7 |
DOIs | |
Publication status | Published - Jul 2021 |
Bibliographical note
Publisher Copyright:© 2021, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.