The fatigue of composite aircraft structures including adhesively bonded joints is conventionally managed using the no-growth design criterion where any damage growth is generally not permitted. However, within resin-dominant load cases, some damage, particularly adhesive disbond and composite delamination, can grow at fatigue peak loads well below 50% of the joint static strength. In these cases, a more damage-tolerant approach could be applicable. Since 2010, the Federal Aviation Administration has deemed the slow-growth management approach an applicable method of managing fatigue damage growth of aircraft structures, provided the damage growth is predictable. If implemented, composite aircraft structures could see weight reductions and lower maintenance costs. However, there is currently a lack of research into the slow-growth damage behaviour of adhesively bonded composite structures to take advantage of this slow-growth management approach. Research is particularly sparse for the damage behaviour of bonded composite structures under compression loading. This thesis assessed the slow-growth damage behaviour of adhesively bonded composite structures with embedded disbond or delamination cracks for composite aircraft structures under static or fatigue loading. Two composite joint configurations, a composite-metal hybrid double-lap joint and a composite-composite single-strap joint stabilised with an aluminium honeycomb core, were designed, fabricated, and tested. The double-lap joints were tested under tension, while the single-strap joints were tested under compression via four-point bending. Varying lengths of disbond or delamination cracks were embedded within the joints originating from the edge or the inside of the bonded composite joint. These joints were tested under static and constant-amplitude fatigue loading. Static tests determined the static residual strength of the joints with disbond/delamination cracks of a given size and location. Constant-amplitude fatigue tests with active monitoring were conducted to assess the fatigue life and changing damage behaviour, with slow-growth damage behaviour being the primary focus of the studies. 2 Slow-growth damage was observed within a significant portion of the overlap length for taper-end disbond and gap-region delamination for the double-lap joints, as well as gap-region disbond for the single-strap joints. Finite element models were developed in Abaqus CAE to predict the residual strengths and energy release rates of the joints. Finally, modified Paris laws were established by combining experimental crack growth rates with numerical energy release rates to enable fatigue life predictions for composite joints exhibiting slow-growth damage disbond or delamination. Experimentally derived constants were determined through data fitting. The resulting fatigue life predictions agreed well with the experimentally measured fatigue life.
| Date of Thesis submission | 2025 |
|---|
| Original language | English |
|---|
| Awarding Institution | - Western Sydney University
|
|---|
| Supervisor | Sarah Zhang (Supervisor) & Richard Yang (Supervisor) |
|---|
Slow-growth damage behaviour of adhesively bonded joints with embedded disbond or delamination cracks for composite aircraft structures under static and fatigue loading
Wong, L. (Author). 2025
Western Sydney University thesis: Doctoral thesis